guardhaa.blogg.se - What is a genesys logic usb2.0 card reader

What is a genesys logic usb2.0 card reader drivers#
What is a genesys logic usb2.0 card reader upgrade#
What is a genesys logic usb2.0 card reader portable#
What is a genesys logic usb2.0 card reader series#

Downstream devices can be charged while upstream VBUS is not present, which can be applied on wall charger applications.Downstream ports can be turned from a Standard Downstream Port (SDP) into Charging Downstream Port (CDP) or Dedicated Charging Port (DCP).Compliant with USB Battery Charging Revision v1.2, supporting CDP, DCP, and ACA-Dock.Featuring fast-charging on all downstream ports and upstream port.Host bridge hardware engine implemented in G元590-S for KM applications.Multiple upstream port supported in G元590-S.Supporting register setting by firmware.Supporting electrical tuning for each specific port.

Automatic switching between self-powered and bus-powered modes.

Supporting compound-device (non-removable setting on downstream ports).

What is a genesys logic usb2.0 card reader upgrade#

Supporting full in-system programming firmware upgrade by SPI-flash.

Configurable Upstream and Downstream Ports in G元590-S.

Configurable downstream ports, downstream port can be disabled/enabled by each specific port for USB3.1/USB2.0.

Supporting both low/high-enabled power switches.

Supporting individual/gang mode over-current detection for all downstream ports.

Supporting USB Link Power Management (LPM) L0/L1/L2.

Supporting USB 3.1 U0/U1/U2/U3 power management states.

Advanced power management and low power consumption.

Internal power-fail detection for ESD recovery.

What is a genesys logic usb2.0 card reader drivers#

Improving output drivers with slew-rate control for EMI reduction.

Superior performance when multiple FS devices operate concurrently.

Providing dedicated TT control logics for each downstream port.

Multiple Transaction Translator (TT) architecture.

With 256-byte RAM, 20K-byte internal ROM, and 64K-byte SRAM.

Performance: 12 MIPS 12.5MHz (maximum).

1 cycle instruction execution (maximum).

USB-C port supporting USB-C current modes, including USB Default, On-chip 8-bit micro-processor.

Support up to 4-port native USB Type-C ports, no external Mux or CC controller needed.

Support up to 2-port Power Delivery 3.0.

Support TCPC interface compliant with Type-C™ Port Controller Interface Spec 1.0.

Compliant with Power Delivery spec rev.

Compliant with USB Type-C™ Cable and Connection Specification Revision 1.0.

What is a genesys logic usb2.0 card reader series#

Native USB USB-C/Power delivery support in G元590-S series.Backward compatible to USB specification Revision 2.0/1.1.Downstream ports support SS+, SS, HS, FS, and LowSpeed (LS) traffic.Upstream port supports SuperSpeed+ (10G/SS+), SuperSpeed (5G/SS), HighSpeed (HS) and FullSpeed (FS) traffic.

It can enable systems to fast charge handheld devices even during “Sleep” and “Power-off” modes.

What is a genesys logic usb2.0 card reader portable#

It also allows portable devices to draw up to 1.5A from G元590 charging downstream ports (CDP) or dedicated charging port (DCP). With different configurations, it could fast-charge Apple devices with up to 2.4A, Samsung Galaxy devices, and any device complaint with BC1.2/1.1. G元590 features the native fast-charging and complies with USB-IF battery charging specification rev1.2. G元590 also implements multiple TT architecture providing dedicated TT to each downstream (DS) port, which guarantees Full-Speed(FS) data passing bandwidth when multiple FS devices perform heavy loading operations. It supports Super Speed, Hi-Speed, and Full-Speed USB connections and is fully backward compatible to all USB 2.0 and USB 1.1 hosts. G元590 integrates Genesys Logic self-developed USB 3.1 Gen 2 Super Speed transmitter/receiver physical layer (PHY) and USB 2.0 High-Speed PHY. It is compliant with the USB 3.1 specification. Genesys G元590 is a low-power, and configurable USB 3.1 Gen 2 hub controller.